Cisco catalyst 2960 48 port review

Here are the steps to configure VLANs and virtual networks on a WS-C2960-48PST-L Cisco Catalyst 2960 48 Ports Ethernet Switch:

• Create VLANs: To create a VLAN, log in to the switch using the command-line interface [CLI] and use the "vlan" command to create a new VLAN. For example, to create VLAN 10, enter the command "vlan 10" and then enter "name vlan10" to give it a name.
• Assign ports to VLANs: Once you have created VLANs, use the "switchport access vlan" command to assign specific ports to each VLAN. For example, to assign port 1 to VLAN 10, enter the command "interface fastethernet 0/1" to select the port, and then enter "switchport mode access" followed by "switchport access vlan 10".
• Configure VLAN trunking: To allow multiple VLANs to be carried over a single physical link [trunking], use the "switchport mode trunk" command on the appropriate port. You can also use the "switchport trunk allowed vlan" command to specify which VLANs are allowed to be carried over the trunk.
• Create a virtual network: To create a virtual network, you can use the "interface vlan" command followed by a number to create a new virtual interface. For example, to create a virtual network with the IP address 192.168.1.1, enter the command "interface vlan 10" followed by "ip address 192.168.1.1 255.255.255.0".
• Assign ports to virtual networks: Once you have created a virtual network, use the "interface fastethernet" command to select a port and then use the "switchport access vlan" command to assign the port to the virtual network.
• Verify configuration: Use the "show vlan" and "show interfaces" commands to verify your VLAN and virtual network configurations.

General Information about this Cisco WS-C2960-48PST-L

• Manufacturer: Cisco
• Model Number or SKU# WS-C2960-48PST-L
• Product Line: Catalyst
• Product Series: 2960
• Product Type: Ethernet Switch

Interfaces/Ports for 48 Ports Ethernet Switch

• Total Number of Network Ports: 50
• Form Factor Rack-mountable-1U
• Uplink Port: Yes
• Number of PoE [RJ-45] Ports 48
• Port/Expansion Slot Details 2 x Gigabit Ethernet Expansion Slot
• Port/Expansion Slot Details 2 x Gigabit Ethernet Uplink
• Port/Expansion Slot Details 48 x Fast Ethernet Network

Performance of Catalyst of 2960-48PST-L Managed Switch

• Ethernet Technology Gigabit Ethernet
• Network Technology 10/100Base-TX
• Network Technology 10/100/1000Base-T

Network & Communication

• Layer Supported: 2

Features

• Layer 2 switching, auto-sensing per device, dynamic IP address assignment, power over Ethernet [PoE], auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink [auto MDI/MDI-X], IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol [RSTP] support, Multiple Spanning Tree Protocol [MSTP] support, DHCP snooping, Dynamic Trunking Protocol [DTP] support, Port Aggregation Protocol [PAgP] support, Access Control List [ACL] support, Quality of Service [QoS], PoE+, Link Aggregation Control Protocol [LACP], Port Security, MAC Address Notification, Remote Switch Port Analyzer [RSPAN]

Compliant Standards

• IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad [LACP], IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab [LLDP], IEEE 802.3at

Memory

• Standard Memory 64 MB
• Memory Technology DRAM
• Flash Memory 32 MB

Power Description

• PoE [RJ-45] Port: Yes
• Input Voltage: 220 V AC
• Input Voltage: 110 V AC
• Power Source: Power Supply
• Redundant Power Supply: Yes

Dimensions and Weight

• Height 1.7 Inch
• Width 17.5 Inch
• Depth 13 Inch
• Weight [Approximate] 11.90 LBS

Miscellaneous

• Additional Information
• Cisco IOS Software
• IEEE 802.1x
• ACL
• SSH v2
• TACACS
• RADIUS
• Green Compliant Yes
• Green Compliance Certificate/Authority RoHS-5

Product Condition:

Refurbished

Warranty provided by ALLHDD.COM:

90 Days

About Refurbished Products

Refurbished products are typically refurbished by an Original Manufacturer or an affiliate of the manufacturer or 3rd party facility. This product may have minor blemishes due to normal product usage and doesn't necessarily come with documentation and software unless indicated, but has been well tested and generally has never had any defects.

Here, you can check more available conditions of your desired product WS-C2960-48PST-L at a competitive price. We are trying our best to meet your needs on the enterprise-level computer, server, data centre, and networking hardware. You are welcome to ask our live chat or get live representative support over the phone.

Other Available Conditions for this Part

Other Available Categories For - Networking - Switch

Warranty

ALLHDD guarantees that the products will not have defects in material that will affect the product's functionality during the Standard Warranty Period. The warranty period starts when the merchandise/items from our warehouse.

What does ALLHDD.Com warranty cover?

30-days to 3 years warranty:

Replacement or refund. In the case of material defects, we will try to replace the product first. The product will be replaced before the expiration of the original warranty. For any failure of hardware, if we cannot process the replacement of the product[s]/model[s], we will refund the original selling/invoiced price. The shipping costs and sales tax, if any, are non-refundable. ALLHDD retains the right to decide whether the item[s] will process for replacement or refund.

What is not covered by our warranty?

The reason why our warranty does not cover any problem caused by the following conditions:

[a] misuse of hardware; accidental damage; carelessness product[s] damage; shock; temperature beyond the specification of any product; faulty installation; operation; modification of goods;

[b] any misuse outside the instructions in the user manual for any specific product;

[c] damaged caused by other hardware or equipment. The warranty will void if the item is returned with physical damage, damage to the retail box, removed from the box, counterfeit labels/labelled by them, or any modifications of internal and external covers. Data loss or damages to any other equipment we do not cover by our offered warranty.

What is the Manufacturer/Brand Warranty?

In general, a manufacturer's warranty service/support is a written guarantee to the buyer of a product. Its terms assure the replacement or repair of the product, if necessary, within a specified period after the purchase [2-5 years depending on the brand/manufacturer]. It is typically included in the price of the product. Products are brand new and sealed and the original manufacturer box is complete with the Manufacturer's genuine warranty. For most of the brand new/retail products that come with the manual and box, exceptions may apply [i.e., Cisco, Juniper Networks].

For the server parts [i.e., Dell, HPE] to get Full coverage of the warranty server must have a full 3- 5 years warranty. However, ALLHDD.COM will cover the warranty duration if any Manufacturer doesn't support the advertised warranty and there is no refund for those. Final Sale items are non-returnable/refundable in any situation. Any question? please ask our team before the shipment.

Important notes:

We can provide additional warranty service/support for any product you purchase from us if you need additional warranty coverage before finalizing the order from ALLHDD.Com. You need to ask in live chat/help or call us for more information.

Individual product warranty mentioned on each item product description page/detail page.

Free Technical support on purchased items, our expert consultancy over the phone, by email, by live chat, or by remote login.

Is cisco 2960 end of life?

Cisco announces the end-of-sale and end-of-life dates for the Cisco IOS Software and DWP dot1x Licenses for Catalyst 2960 Series Switches. The last day to order the affected product[s] is September 5, 2023.

What is the price of cisco 2960 PoE 48 port?

Download Quote Sheet.

What is the advantage of cisco 2960 switch?

The Cisco® Catalyst® 2960 Series is a family of fixed- configuration, standalone switches that provide Fast Ethernet and Gigabit Ethernet connectivity and support enhanced switching services, advanced security, IP communications, wireless networking, and scalable management.

What is replacing cisco 2960?

The Cisco Catalyst 9200 is the first switches to replace the Cisco Catalyst 2960X in fixed enterprise switching access platforms. It is designed for security, resiliency and programmability. Today we will discuss the difference between Cisco Catalyst 9200 and Cisco Catalyst 2960X.