Anycubic mega s 3d printer review năm 2024

Mega-S is an FDM 3D printer from the Chinese manufacturer Anycubic, an experienced provider of affordable machines. Mega-S has a fairly common Cartesian frame design and key functions for decent quality printing. It has an average build volume of 16.14 x 15.95 x 17.83 in (210 x 210 x 205 mm) and a modular structure, which helps to set up the machine relatively quickly. Mega-S is an improved version of i3 Mega, though, the key differences between the two include a filament holder and a titan-like extruder.

Features:

• Easy assembly;
• Print resume function;
• Filament outage detection;
• Ultrabase print plate;
• 3.5” Colorful touchscreen;
• Metal frame;
• Improved Titan extruder.

Mega-S has a sleek design and doesn’t stand out at first. However, many users find this machine a very reliable companion and favor it over similar printers. Let’s look closer at Mega-S.

Metal frame and Dual rail Y-axis

An unstable frame and wobbly Z-axis is some of the common issues FDM printing enthusiasts are battling. Mega-S has a full metal frame, which increases the structural stability. Additionally, it’s worth pointing out that the printing bed is guided by two rails rather than one, which makes Y-axis movement smoother. The electronics are also enclosed in metal and placed under the printing bed.

Anycubic Ultrabase

This self-developed printing bedplate became a staple of Anycubic’s FDM printers. Thanks to the porous glass texture, the plate helps prints to adhere and get easily removed after the bed is cooled down.

Titan-like Extruder

Mega-S features a slightly different type of extruder, similar to Titan, meaning that filament is guided through gears first. This change helps feed filament and print more evenly.

Filament and Power outage

Mega-S will let you know when you are running out of filament. It will also resume printing after a power outage if one happens. These features are pretty standard in modern FDM printers, though, still worth mentioning, especially since they work without fails on Mega-S.

Removable drivers of the motherboard

A nice little detail is that drivers can be removed from the motherboard. For experienced users that means easier upgrades or cheaper maintenance in case one driver breaks.

Z-axis homing

Mega-S doesn’t have auto or even semi-auto calibration but synchronizes both sides of the Z-axis. After the initial setup, Z-axis will even itself out after each homing.

Some small downsides

There are no significant issues or troublesome features to the machine. However, some details can be improved. For example, the power supply for Mega-S is 12V only, which is low in comparison to other modern models on the market, though enough for a machine of this size. Drivers for Mega-S are reliable but loud, so users concerned about the noise may want to upgrade that in the future. The main downside to Mega-S is the cooling fans, which are quite weak. Right from the box, they fail to provide proper cooling to the part at higher printing speeds. This particular detail is better to be upgraded at first, especially, if you plan to work with PLA plastics primarily. On the bright side, Mega-S is almost identical to i3 Mega, meaning all upgrades (which there are lots of thanks to the popularity of this printer) are interchangeable.

Mega-S improvements and Upgrades:

• Anycubic i3 Mega X-Carriage [MK4] by ML3DPrinting – includes a whole bunch of handy things for axis tensioners, touch sensor (for bed leveling) and cooling fan duct.
• Anycubic i3 Mega Tool Rig by mjuddi – simple tool holder for printing essentials.
• Anycubic I3 Mega fan modification by Nilenium – upgrade for using two fans.

A nice printer with an excellent quality

An inexpensive open-frame 3D printer, the Anycubic i3 Mega S ($269.99) has an ample build area, a sturdy metal chassis, and decent print quality for a basic filament-based machine. It supports a variety of filament types and employs fused filament fabrication (FFF) technology. The price is attractive for those new to or wanting to experiment with 3D printing, but know that its print-bed alignment proved to be finicky in our tests, which had an impact on the print quality of at least one of our test objects. Still, although it may involve some tinkering and a learning curve, the Mega S is easy enough to assemble and is a good choice for beginners—just make sure that youngsters don't get too close to the exposed, hot extruder.

Some Assembly Required

The Mega S is made by Shenzhen, China-based Anycubic, a major manufacturer of 3D printers. Although it has its own online store, in the US it sells chiefly through Amazon. The Mega S is typical of today's budget 3D printers, with an open frame and a relatively large build volume, in this case 8.1 by 8.3 by 8.3 inches (HWD). That makes its build area larger than that of the Original Prusa Mini (7 by 7 by 7 inches), and nearly as large as the Original Prusa i3 MK3S (9.8 by 8.3 by 7.9 inches). The price is low, a bit more than the Monoprice Mini Delta V2 3D Printer ($179.99), but the Mega S has a much larger build area.

Before you can start printing, some minor assembly, starting by screwing the printer's frame to its base, needs to be completed. The steps are detailed in the user manual, which comes in both a paper version and on an included SD card, which also includes one test print file and from which I launched all our test prints, using the printer's on-chassis LCD.

The main step in assembly is fastening together the two main components, the base—which includes the print platform, the LCD, various ports, and electronics—and the frame, a squared-off arch that stands astride the base and holds the extruder, the X-axis motor, and the X- and Z-axis carriages. The last allow the extruder to move vertically and horizontally (side to side). You fasten the base and frame together using eight screws, which you tighten with an included Allen key.

You then connect several cables (for motors and the filament detector), plugging them into their sockets according to diagrams in the user manual. Then you fasten the filament spool holder to the side of the base using additional screws. (The spool holder is awkwardly positioned, as its placement—especially when a spool is attached—makes it tricky to reach the USB port and, especially, the SD-card slot.)

Once you plug in the printer and turn it on, you are ready to level the printing platform. You accomplish this by using the LCD to lower the extruder incrementally until it nearly touches the print platform. (You should be able to slip an included thin card between the extruder nozzle and platform, meeting only slight resistance.) Under each corner of the platform is a knob, the turning of which raises or lowers that corner. You move the extruder to each corner in turn, slipping the card between nozzle and platform and adjusting the knob if needed, to make sure the alignment is correct. You then repeat the process at least once, re-checking all four corners plus the platform's center. This is an important part of the setup process, and worth doing meticulously, as we shall soon see.

Once you place a spool in the spool holder, you slice the free end of the filament at an angle and run it up into the filament sensor and into the white plastic tube that leads to the extruder. You can get the filament to automatically feed by clicking the icons Tools > Filament > Filament In.

The Mega S ships with just a small coil of filament, enough for perhaps two prints, so you will want to order a full filament spool at the time of purchase. When sold through Amazon, the Mega S is frequently bundled with a 1-kilogram spool of polylactic acid (PLA) filament, which is how our test unit was equipped. Anycubic sells both its printers and filament in various types: PLA, acrylonitrile butadiene styrene (ABS), acrylonitrile butadiene styrene (ABS), high-impact polystyrene (HIPS), thermoplastic polyurethane (TPU), and polyethylene terephthalate glycol (PETG). All of those filament types an be handled by the Mega S. Although we recommend that beginners stick with PLA because of its ease of use, more experienced users may want to experiment with the other filaments.

The Software Experience

For software, Anycubic offers the open-source Cura package. Cura comes with most consumer 3D printers we have reviewed, as a download on its site. When installing it, do not be dismayed if you do not see the Mega S in its list of supported printers. It showed up for me only after I had updated the program (when prompted by the software) twice.

Cura is a full-featured suite, which lets you load, modify (move, scale, rotate, mirror, add supports), slice (cut a 3D object file into layers for printing), and save 3D files. The Mega S handles object files in the common .STL and .OBJ formats, as well as the more obscure .DAE and .AMF file types. Standard resolution settings range from Draft (300 microns) through the default setting, Normal (200 microns), to High (100 microns).

Running the Test Prints

I printed eight test objects, all at the Normal resolution setting. Their quality was mixed, ranging from below par to good, with most of them average for a lower-priced filament printer.

Although the Mega S completed the main geometric test object we use—comprising various shapes and text emerging from a steeply angled face—and did well in printing its very small type, parts of the object were warped and some of its elements misshapen.

After a close examination, I concluded that the print platform must have been slightly misaligned with one corner down, causing the object to print slightly askew. I had run through the alignment routine twice during setup, and it had appeared to be okay, but clearly it needed a little more tweaking yet.

As a rule, the greater the width and depth of an object, the more it is likely to be affected by any misalignment. If you just can't seem to get the print platform aligned perfectly, sticking to smaller objects will help mitigate any misshapenness.

A Good Starter 3D Printer

With a low price, a large build area, and decent print quality, the Anycubic i3 Mega S is a good choice for someone getting started in 3D printing. The assembly is minimal and could prove to be a fun project. Youngsters should be supervised when using it, though. Due to its open frame, there is always the possibility of a burn should someone come into contact with the hot extruder. The Cura software is easy to learn and use.

That said, we've tested other low-priced 3D printers worth considering. The Monoprice Mini Delta V2 sells for less than the Mega S and put out a large number of prints with no misprints in our testing. It has a tiny build volume by comparison, though. The Editors' Choice-winning Original Prusa Mini consistently churned out high-quality prints once we got it calibrated correctly. But if you crave an even larger build area, or you'd rather not need to have your printer shipped to you from the Czech Republic, the Mega S is an appealing and cost-effective alternative.

Is Anycubic a good 3D printer brand?

The Bottom Line. Anycubic's Kobra 2 entry-level 3D printer isn't perfect, but its high speed and a budget-friendly price make it an excellent choice for beginners. PCMag editors select and review products independently. If you buy through affiliate links, we may earn commissions, which help support our testing.

Is the Anycubic i3 Mega the same as Mega S?

About the series The Anycubic Mega lineup emerged with the release of the first i3 Mega model in 2017. Just after that, the manufacturer presented an upgraded version — the Anycubic Mega S — with the same look and build volume but also with some additions.

What is the highest quality 3D printer?

The Best 3D Printer.

Our pick. Bambu Lab P1P. The best 3D printer. This printer makes great prints with no manual calibration, and in our tests it took only a short time to set up. ... .

Upgrade pick. Bambu Lab X1 Carbon. For all the bells and whistles. ... .

Also great. Artillery Sidewinder X2. For larger 3D prints..

Is Anycubic a Chinese brand?

Anycubic: Cost-effective desktop FDM & DLP 3D Printers Anycubic is a well-known manufacturer of 3D printers and related accessories. Founded in 2015, located in Shenzhen China. Anycubic has rapidly gained popularity in the 3D printing community for producing high-quality, affordable, and user-friendly printers.