Lỗi cannot find module necessary printing reinstall printer driver năm 2024

Add the printer to your list of available printers: Click the Add Printer, Scanner or Fax button on the right. A dialogue appears listing printers on your local network. It may take a minute or two for your printer to appear.

If your printer still doesn’t appear in the list, try adding the printer by its IP address (see below).

If you can print to the newly added printer queue, delete the old printer queue.

If you can’t add the printer because it doesn’t appear in the list of available printers, it may be turned off, or your Mac may be on a different network now. If the printer was shared by another user, the user may have stopped sharing it, or the user’s Mac may be offline. If you don’t manage the printer, ask the person who does for help.

Note: This will remove all installed Epson printer drivers. You’ll need to reinstall any printer drivers that you still need.

• Empty the trash.
• Restart the computer.
• Go to the appropriate Support Printer model page and download the necessary driver for your printer.
• Open the file you downloaded, and follow the on-screen instructions to install the driver software.
• Click Quit when done.
• From the Apple menu, select System Preferences, then click Print & Fax. Note: If you’re using a USB connection, the printer should automatically appear in the Printers list, indicating that it has been installed. You can skip the remaining steps.
• If you’re using a network connection, click the
  button to add your printer.
• Click More Printers, select Epson TCP/IP, then select your printer. (The Epson Stylus Pro 11880 appears in the example below, but you’ll see your printer name instead).
  Note: If your printer is not displayed, input your printer’s IP address in the Internet address or DNS name field, then click Verify. Your printer should appear on the list. Select your printer, then click Add. Delete the printing job following the procedures described below, and then install the printer driver again.
• Administrator permission is required to stop the Print Spooler. Log on as an Administrators group member.
  Display the "Devices and Printers" screen. Windows 10 (version 1703 or later)
• On the [Start] menu, click [Windows System]
  [Control Panel].
• Click [View devices and printers]. Windows 10 (earlier than version 1703), Windows Server 2016
• Right-click [Start], and then click [Control Panel].
• Click [View devices and printers]. Windows 8.1, Windows Server 2012/2012 R2
• On the Charm Bar, click [Set]
  [Control Panel].
• Click [View devices and printers]. Windows 7, Windows Server 2008 R2
• On the [Start] menu, click [Devices and Printers]. Windows Server 2008
• On the [Start] menu, click [Control Panel].
• Click [Printer] on [Hardware and Sound].
  Right-click the printer on which a printing job is remaining, and then click [See what’s printing].
  Select the remaining job, and click [Document]
  [Cancel].
  On the screen confirming whether to cancel the job, click [Yes].
  Close the print job screen and the properties. If the job was deleted in Step 4, the procedure is completed. If the job was not deleted, proceed to the next step.
  Right-click [Start], and then click [Computer Management].
• For Windows 7, click [Control Panel] on the [Start] menu, and then click [System Security]
  [Administrative Tool]. If you cannot find [System Security], click [Administrative Tool].
  Click [Services and Applications], and double-click [Services].
• For Windows 7, click [Service].
  On the "Services" or "Service (Local)" screen, double-click [Print Spooler].
  Click [Stop], confirm that "Service status" has changed to "Stopped", and then click [OK].
  Keep the "Service" or "Service (Local)" screen opened and proceed to the next step.
  While holding down the [Windows] key on the keyboard, press the [R] key.
  On the "Run" screen, enter [spool], and then click [OK].
  Double-click the [PRINTERS] folder.
• If "You don't currently have permission to access this folder." is displayed, click [Continue].
  Delete all files.
  Close the [PRINTERS] folder screen.
  Return to the "Service" or "Service (Local)" screen, and then double-click [Print Spooler].
  Click [Start], confirm that "Service status" has changed to "Running", and then click [OK].
  Close the all opened screens.